TMO-MED-026 Assembly Guide
Key information for the TMO-MED-026 multi-shelf medical cart. The full manual includes the diagrams and every assembly step.
Compatibility
- Screen size: 15" to 32"
- Maximum load: 10 kg (22 lbs). Do not exceed the maximum load.
- VESA: 75 x 75 and 100 x 100
Assembly overview
- Lay the base on the floor and brake the wheels. Insert the pole into the base and secure it with four screws from below. The wheel height can be adjusted if the floor is uneven.
- Fit the trays, handles and arm pegs included with your configuration, as shown in the manual.
- Insert the cross-arm assembly into the column, rotate it 45 degrees and tighten the screws at the top of the clamp with the hexagonal spanner.
- Place the display face down on a protective surface and choose the correct screws. Leave 2-4 mm between the screw head and the display on the two upper screws.
- Attach the display to the centre mount bracket and tighten with a Phillips screwdriver.
Safety
- Some parts are optional, so not every part will be used.
- The product contains small parts. Keep them away from children.
- Check the package on arrival and report any damage to the shipper.